Torex Semiconductor Ltd
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
XC6124A325ER-G
자세히보기 데이터시트

XC6124A325ER-G

Product Overview

Category

XC6124A325ER-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize the voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124A325ER-G comes in a small SOT-23-5 package.

Essence

The essence of XC6124A325ER-G is to provide a stable and regulated voltage supply to electronic devices.

Packaging/Quantity

It is typically packaged in reels containing 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Dropout Voltage: 200mV @ 100mA
  • Maximum Output Current: 150mA
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124A325ER-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. NC (No Connection)
  5. VOUT (Output Voltage)

Functional Features

  • Low quiescent current consumption
  • Fast transient response
  • Built-in overcurrent protection
  • Thermal shutdown protection
  • Reverse current protection

Advantages and Disadvantages

Advantages

  • Small form factor
  • Wide input voltage range
  • Efficient voltage regulation
  • Overcurrent and thermal protection

Disadvantages

  • Limited maximum output current (150mA)
  • Noisy output at high loads

Working Principles

XC6124A325ER-G operates by comparing the output voltage with a reference voltage. It adjusts the internal pass transistor to maintain a constant output voltage, compensating for changes in input voltage and load conditions.

Detailed Application Field Plans

XC6124A325ER-G is commonly used in various electronic devices, including:

  1. Battery-powered devices
  2. Portable audio players
  3. Wearable devices
  4. IoT applications
  5. Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124A325ER-G are:

  1. LM1117-3.3
  2. MCP1700-3302E/TO
  3. AP2112K-3.3TRG1
  4. LP2985-33DBVR
  5. NCP1117ST33T3G

These models offer similar voltage regulation capabilities and can be suitable replacements depending on specific requirements.

Word count: 345 words

기술 솔루션에 XC6124A325ER-G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of XC6124A325ER-G in technical solutions:

  1. Question: What is XC6124A325ER-G?
    - Answer: XC6124A325ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

  2. Question: What is the operating voltage range of XC6124A325ER-G?
    - Answer: The operating voltage range of XC6124A325ER-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6124A325ER-G work?
    - Answer: XC6124A325ER-G works by comparing the input voltage with a reference voltage. When the input voltage drops below the reference voltage, the output pin of the IC becomes active, indicating a low voltage condition.

  4. Question: What is the typical quiescent current consumption of XC6124A325ER-G?
    - Answer: The typical quiescent current consumption of XC6124A325ER-G is very low, usually around 1.0µA.

  5. Question: Can XC6124A325ER-G be used in battery-powered applications?
    - Answer: Yes, XC6124A325ER-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps to conserve battery life.

  6. Question: What is the output configuration of XC6124A325ER-G?
    - Answer: XC6124A325ER-G has an open-drain output configuration, which means it requires an external pull-up resistor to provide a logic high signal.

  7. Question: What is the typical voltage threshold of XC6124A325ER-G?
    - Answer: The typical voltage threshold of XC6124A325ER-G is 3.25V, as indicated by the part number.

  8. Question: Can XC6124A325ER-G be used for overvoltage protection?
    - Answer: No, XC6124A325ER-G is specifically designed for undervoltage detection and does not provide overvoltage protection.

  9. Question: Is XC6124A325ER-G suitable for automotive applications?
    - Answer: Yes, XC6124A325ER-G is suitable for automotive applications as it can operate within the specified temperature range (-40°C to +105°C) and has a low quiescent current consumption.

  10. Question: Can XC6124A325ER-G be used in industrial control systems?
    - Answer: Yes, XC6124A325ER-G can be used in various industrial control systems where monitoring the power supply voltage is crucial for proper operation and system protection.

Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.