Torex Semiconductor Ltd
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
XC6124C526MR-G
자세히보기 데이터시트

XC6124C526MR-G

Product Overview

Category

XC6124C526MR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • High efficiency

Package

XC6124C526MR-G is available in a small surface mount package.

Essence

The essence of XC6124C526MR-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

XC6124C526MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 5.2V ± 2%
  • Maximum Output Current: 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 40µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124C526MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6124C526MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to prevent damage to the circuitry.
  • Low dropout voltage: The low dropout voltage allows for efficient operation even when the input voltage is close to the desired output voltage.

Advantages and Disadvantages

Advantages

  • Small form factor enables easy integration into compact electronic devices.
  • Low power consumption helps conserve energy.
  • High efficiency results in minimal power loss during voltage regulation.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • Narrow input voltage range restricts compatibility with certain systems.

Working Principles

XC6124C526MR-G utilizes a voltage reference and feedback mechanism to maintain a constant output voltage. When the input voltage varies, the internal circuitry adjusts the output voltage accordingly, ensuring a stable and regulated supply.

Detailed Application Field Plans

XC6124C526MR-G finds application in various electronic devices and systems, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable technology - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6124C526MR-G are: - XC6206P526MR - LM1117IMPX-5.2/NOPB - MCP1700T-5202E/TT

These alternatives can be considered based on specific requirements and compatibility with the target system.

Word count: 346 words

기술 솔루션에 XC6124C526MR-G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of XC6124C526MR-G in technical solutions:

  1. Question: What is XC6124C526MR-G?
    Answer: XC6124C526MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6124C526MR-G?
    Answer: The operating voltage range of XC6124C526MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6124C526MR-G help in technical solutions?
    Answer: XC6124C526MR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level.

  4. Question: Can XC6124C526MR-G be used in battery-powered applications?
    Answer: Yes, XC6124C526MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0μA.

  5. Question: What is the output type of XC6124C526MR-G?
    Answer: XC6124C526MR-G has an open-drain output type, which means it can be easily connected to other devices with different voltage levels.

  6. Question: What is the typical reset threshold voltage of XC6124C526MR-G?
    Answer: The typical reset threshold voltage of XC6124C526MR-G is 5.2V.

  7. Question: Does XC6124C526MR-G have a built-in delay time for the reset signal?
    Answer: Yes, XC6124C526MR-G has a built-in delay time of typically 200ms to ensure stable operation during power-up or voltage fluctuations.

  8. Question: Can XC6124C526MR-G be used in automotive applications?
    Answer: Yes, XC6124C526MR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  9. Question: What is the package type of XC6124C526MR-G?
    Answer: XC6124C526MR-G is available in a small SOT-25 package, which makes it suitable for space-constrained designs.

  10. Question: Is XC6124C526MR-G RoHS compliant?
    Answer: Yes, XC6124C526MR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications for XC6124C526MR-G.