XC6124D516MR-G

Product Overview

Use

It is used to regulate and stabilize voltage in electronic circuits.

Characteristics

Input Voltage Range: 2.5V to 6.0V
Output Voltage Range: 1.2V to 5.5V
Maximum Output Current: 150mA
Low Dropout Voltage: 200mV at 100mA
Low Quiescent Current: 30μA (typical)
Package Type: DFN (Dual Flat No-Lead)
Package Dimensions: 2.0mm x 2.0mm x 0.58mm
Operating Temperature Range: -40°C to +85°C

Packaging/Quantity

XC6124D516MR-G is available in tape and reel packaging. The quantity per reel is 3000 pieces.

Specifications

Input Voltage Range: 2.5V to 6.0V
Output Voltage Range: 1.2V to 5.5V
Maximum Output Current: 150mA
Dropout Voltage: 200mV at 100mA
Quiescent Current: 30μA (typical)
Line Regulation: ±0.3% (typical)
Load Regulation: ±0.5% (typical)
Ripple Rejection Ratio: 70dB (typical)
Output Noise Voltage: 30μVrms (typical)
Short Circuit Protection: Yes
Thermal Shutdown Protection: Yes

Detailed Pin Configuration

The XC6124D516MR-G has the following pin configuration:

VIN: Input Voltage Pin
GND: Ground Pin
EN: Enable Pin
VOUT: Output Voltage Pin

Functional Features

Low dropout voltage ensures efficient regulation even with small input-output differentials.
Low quiescent current minimizes power consumption in standby mode.
Short circuit protection prevents damage to the regulator and connected components.
Thermal shutdown protection safeguards against overheating.

Advantages and Disadvantages

Advantages

Wide input voltage range allows for versatile applications.
Small package size saves board space.
Low dropout voltage enables efficient operation.
Excellent line and load regulation for stable output voltage.
Short circuit and thermal protection enhance reliability.

Disadvantages

Maximum output current of 150mA may limit usage in high-power applications.
Limited output voltage range may not suit all requirements.

Working Principles

XC6124D516MR-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage, adjusting the pass transistor's resistance to maintain a constant output voltage. The enable pin allows for control of the regulator's operation.

Detailed Application Field Plans

XC6124D516MR-G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable devices - Industrial equipment - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to XC6124D516MR-G are: - XC6206P332MR-G - XC6220B332MR-G - XC6219B332MR-G - XC6221B332MR-G - XC6223B332MR-G - XC6225B332MR-G - XC6227B332MR-G - XC6230B332MR-G - XC6233B332MR-G

These models offer similar functionality and specifications, providing options for different design requirements.

Word count: 410 words

기술 솔루션에 XC6124D516MR-G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of XC6124D516MR-G in technical solutions:

Q: What is XC6124D516MR-G? A: XC6124D516MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q: What is the operating voltage range of XC6124D516MR-G? A: The operating voltage range of XC6124D516MR-G is from 0.8V to 6.0V.
Q: How does XC6124D516MR-G work? A: XC6124D516MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or rises above the reference voltage, it triggers an output signal.
Q: What is the output type of XC6124D516MR-G? A: XC6124D516MR-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor.
Q: What is the typical quiescent current consumption of XC6124D516MR-G? A: The typical quiescent current consumption of XC6124D516MR-G is very low, usually around 1.0µA.
Q: Can XC6124D516MR-G be used for undervoltage and overvoltage detection? A: Yes, XC6124D516MR-G can be used for both undervoltage and overvoltage detection, depending on how it is configured.
Q: What is the accuracy of XC6124D516MR-G? A: The accuracy of XC6124D516MR-G is typically ±1.5% at room temperature.
Q: Can XC6124D516MR-G be used in automotive applications? A: Yes, XC6124D516MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.
Q: Does XC6124D516MR-G have built-in hysteresis? A: Yes, XC6124D516MR-G has a built-in hysteresis feature to prevent output oscillation near the threshold voltage.
Q: What is the package type of XC6124D516MR-G? A: XC6124D516MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.