이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
XC6124E618ER-G

XC6124E618ER-G

Product Overview

Category

XC6124E618ER-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • High efficiency

Package

XC6124E618ER-G is available in a small surface-mount package.

Essence

The essence of XC6124E618ER-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

It is typically packaged in reels or tubes, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.8V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124E618ER-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Voltage regulation: XC6124E618ER-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to prevent damage to the circuitry.
  • Thermal shutdown: In case of excessive temperature, the device shuts down to avoid overheating.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • Low power consumption helps conserve energy.
  • High efficiency results in minimal power loss during voltage regulation.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Narrow input voltage range restricts compatibility with certain systems.

Working Principles

XC6124E618ER-G utilizes a feedback mechanism to maintain a constant output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly to regulate the output voltage within the specified range.

Detailed Application Field Plans

XC6124E618ER-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124E618ER-G are: - XC6201 series - XC6202 series - XC6203 series - XC6204 series

These models offer similar voltage regulation capabilities and come in different package options to suit specific design requirements.

In conclusion, XC6124E618ER-G is a compact voltage regulator with excellent voltage regulation characteristics. Its small size, low power consumption, and high efficiency make it suitable for a wide range of electronic applications. However, its limited output current and narrow input voltage range should be taken into consideration when selecting an appropriate voltage regulator for high-power or specific system requirements.

기술 솔루션에 XC6124E618ER-G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of XC6124E618ER-G in technical solutions:

  1. Q: What is XC6124E618ER-G? A: XC6124E618ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used in various technical solutions to monitor and detect voltage levels.

  2. Q: What is the operating voltage range of XC6124E618ER-G? A: The operating voltage range of XC6124E618ER-G is from 0.8V to 6.0V.

  3. Q: How does XC6124E618ER-G work? A: XC6124E618ER-G works by continuously monitoring the input voltage and comparing it to a fixed threshold voltage. When the input voltage falls below the threshold, an internal reset signal is generated.

  4. Q: What is the purpose of using XC6124E618ER-G in technical solutions? A: XC6124E618ER-G is commonly used as a voltage supervisor or power-on reset (POR) circuit in technical solutions to ensure proper system initialization and reliable operation.

  5. Q: Can XC6124E618ER-G be used in battery-powered applications? A: Yes, XC6124E618ER-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Q: What is the output type of XC6124E618ER-G? A: XC6124E618ER-G has an open-drain output type, which allows for flexibility in connecting external components.

  7. Q: Is XC6124E618ER-G suitable for automotive applications? A: Yes, XC6124E618ER-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  8. Q: Can XC6124E618ER-G tolerate voltage spikes or transients? A: Yes, XC6124E618ER-G has built-in overvoltage protection and can tolerate voltage spikes or transients up to 30V.

  9. Q: What is the typical reset threshold voltage of XC6124E618ER-G? A: The typical reset threshold voltage of XC6124E618ER-G is 1.8V.

  10. Q: Does XC6124E618ER-G have any additional features? A: Yes, XC6124E618ER-G includes a manual reset input (MR) and a hysteresis function to prevent output oscillation near the threshold voltage.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.