XC6124E749MR-G
Product Overview
Category
XC6124E749MR-G belongs to the category of voltage regulators.
Use
It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.
Characteristics
- Voltage regulation: XC6124E749MR-G provides a stable output voltage regardless of input voltage fluctuations.
- Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
- Low quiescent current: The regulator consumes minimal current when no load is connected.
- Thermal shutdown protection: It automatically shuts down to prevent damage due to excessive heat.
Package
XC6124E749MR-G is available in a small form factor package, making it suitable for space-constrained applications.
Essence
The essence of XC6124E749MR-G lies in its ability to maintain a constant voltage output despite variations in the input voltage.
Packaging/Quantity
The product is typically packaged in reels or tubes, with a quantity of 3000 units per reel.
Specifications
- Input voltage range: 2.5V - 6.0V
- Output voltage: 3.3V
- Maximum output current: 150mA
- Dropout voltage: 200mV (at 100mA)
- Quiescent current: 30µA (typical)
- Operating temperature range: -40°C to +85°C
Detailed Pin Configuration
XC6124E749MR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- Voltage regulation: Maintains a stable output voltage of 3.3V.
- Low dropout voltage: Operates efficiently even with a small difference between input and output voltages.
- Thermal shutdown protection: Prevents damage due to excessive heat by shutting down the regulator.
Advantages and Disadvantages
Advantages
- Stable output voltage regardless of input voltage fluctuations.
- Efficient operation with low dropout voltage.
- Minimal current consumption when no load is connected.
- Protection against overheating.
Disadvantages
- Limited maximum output current of 150mA.
Working Principles
XC6124E749MR-G utilizes a feedback mechanism to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage. The regulator continuously monitors the input voltage and adjusts its internal components to compensate for any variations, ensuring a stable output.
Detailed Application Field Plans
XC6124E749MR-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable consumer electronics - Embedded systems - IoT devices - Wearable technology
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6124E749MR-G are: - LM1117-3.3: A popular voltage regulator with similar specifications. - MCP1700-3302E: Another voltage regulator offering stable 3.3V output. - AMS1117-3.3: Low dropout voltage regulator suitable for various applications.
These alternative models provide similar functionality and can be used as substitutes depending on specific requirements.
Word count: 410 words
기술 솔루션에 XC6124E749MR-G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of XC6124E749MR-G in technical solutions:
Question: What is XC6124E749MR-G?
- Answer: XC6124E749MR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level in electronic circuits.Question: What is the operating voltage range of XC6124E749MR-G?
- Answer: The operating voltage range of XC6124E749MR-G is typically between 0.8V and 6.0V.Question: What is the purpose of using XC6124E749MR-G in technical solutions?
- Answer: XC6124E749MR-G is commonly used as a voltage monitoring and detection component in various electronic devices and systems. It helps ensure stable operation by providing accurate voltage level information.Question: How does XC6124E749MR-G detect voltage levels?
- Answer: XC6124E749MR-G uses an internal voltage reference and comparator to compare the input voltage with a preset threshold. When the input voltage crosses the threshold, it triggers an output signal.Question: Can XC6124E749MR-G be used in battery-powered applications?
- Answer: Yes, XC6124E749MR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.Question: What is the output configuration of XC6124E749MR-G?
- Answer: XC6124E749MR-G has an open-drain output configuration, which means it can be connected to other components or microcontrollers for further processing.Question: Is XC6124E749MR-G suitable for automotive applications?
- Answer: Yes, XC6124E749MR-G is suitable for automotive applications as it meets the necessary requirements such as AEC-Q100 Grade 2 qualification.Question: Can XC6124E749MR-G be used in high-temperature environments?
- Answer: Yes, XC6124E749MR-G has a wide operating temperature range of -40°C to +105°C, making it suitable for use in high-temperature environments.Question: What is the typical response time of XC6124E749MR-G?
- Answer: The typical response time of XC6124E749MR-G is around 200µs, allowing for quick detection and response to voltage changes.Question: Are there any specific application notes or reference designs available for XC6124E749MR-G?
- Answer: Yes, Torex Semiconductor provides application notes and reference designs on their website that can help users understand and implement XC6124E749MR-G in various technical solutions.
Please note that the answers provided here are general and may vary depending on the specific requirements and use cases. It is always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate information.