XC6124F647MR-G

Product Overview

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

Package: The XC6124F647MR-G comes in a small SOT-25 package.
Essence: This voltage regulator is designed to provide stable and regulated output voltage.
Packaging/Quantity: It is typically sold in reels or tubes, with a quantity of 3000 units per reel.

Specifications

The specifications of XC6124F647MR-G are as follows:

Input Voltage Range: 2.5V to 6.0V
Output Voltage: 3.3V
Output Current: 150mA
Dropout Voltage: 200mV (typical)
Quiescent Current: 30µA (typical)
Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC6124F647MR-G has three pins:

VIN: Input voltage pin
VOUT: Output voltage pin
GND: Ground pin

Functional Features

Low dropout voltage: The XC6124F647MR-G has a low dropout voltage, allowing it to regulate the output voltage even when the input voltage is close to the desired output voltage.
Low quiescent current: It consumes very low current when in standby mode, making it suitable for battery-powered applications.
Short-circuit protection: The voltage regulator has built-in short-circuit protection to prevent damage to the circuit in case of a short circuit.

Advantages and Disadvantages

Advantages: - Small package size - Low dropout voltage - Low quiescent current - Short-circuit protection

Disadvantages: - Limited output current capacity (150mA)

Working Principles

The XC6124F647MR-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It compares the output voltage with a reference voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

The XC6124F647MR-G can be used in various applications, including: - Battery-powered devices - Portable electronic devices - IoT (Internet of Things) devices - Consumer electronics - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to XC6124F647MR-G are: - XC6206P332MR: 3.3V, 200mA voltage regulator - LM1117MPX-3.3/NOPB: 3.3V, 800mA voltage regulator - MCP1700T-3302E/TT: 3.3V, 250mA voltage regulator

These alternative models offer similar functionality and can be used as replacements depending on specific requirements.

In conclusion, the XC6124F647MR-G is a small-sized voltage regulator with low dropout voltage and quiescent current. It is suitable for various applications and has alternatives available with different specifications.

기술 솔루션에 XC6124F647MR-G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of XC6124F647MR-G in technical solutions:

Question: What is XC6124F647MR-G?
- Answer: XC6124F647MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Question: What is the operating voltage range of XC6124F647MR-G?
- Answer: The operating voltage range of XC6124F647MR-G is typically between 0.6V and 6.0V.
Question: How does XC6124F647MR-G work?
- Answer: XC6124F647MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or exceeds the specified threshold, it triggers an output signal to indicate the voltage status.
Question: What is the output type of XC6124F647MR-G?
- Answer: XC6124F647MR-G has an open-drain output type, which means it can sink current but cannot source current. An external pull-up resistor is required to provide the output voltage level.
Question: What is the typical quiescent current consumption of XC6124F647MR-G?
- Answer: The typical quiescent current consumption of XC6124F647MR-G is very low, usually around 1.0µA.
Question: Can XC6124F647MR-G be used for overvoltage protection?
- Answer: No, XC6124F647MR-G is primarily designed for undervoltage detection. It does not provide overvoltage protection functionality.
Question: What is the accuracy of the voltage detection threshold in XC6124F647MR-G?
- Answer: The accuracy of the voltage detection threshold in XC6124F647MR-G is typically ±1.5%.
Question: Can XC6124F647MR-G be used in automotive applications?
- Answer: Yes, XC6124F647MR-G is AEC-Q100 qualified and suitable for automotive applications.
Question: What is the temperature range of operation for XC6124F647MR-G?
- Answer: XC6124F647MR-G has an operating temperature range of -40°C to +85°C.
Question: Is XC6124F647MR-G available in different package options?
- Answer: Yes, XC6124F647MR-G is available in a variety of package options, including SOT-25, USP-6B05, and DFN2020-6.