Torex Semiconductor Ltd
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
XC6124F748MR-G
자세히보기 데이터시트

XC6124F748MR-G

Product Overview

Category

XC6124F748MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124F748MR-G is available in a small form factor package, making it suitable for space-constrained applications.

Essence

The essence of XC6124F748MR-G lies in its ability to provide stable and regulated voltage output to power electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tape and reel packaging. The quantity per reel varies depending on the manufacturer's specifications.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.8V
  • Output Current: 200mA
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 40μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124F748MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage regulation: XC6124F748MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • High efficiency results in minimal power loss.
  • Wide input voltage range provides flexibility in various applications.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may affect performance in low input voltage scenarios.

Working Principles

XC6124F748MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage.

Detailed Application Field Plans

XC6124F748MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Wearable devices - IoT devices - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124F748MR-G are: - LM1117-1.8V: A popular linear voltage regulator with similar specifications. - AP2112-1.8V: Another voltage regulator known for its low dropout voltage and small package size. - TPS79618: A high-performance voltage regulator with adjustable output voltage.

These alternative models offer similar functionality and can be used as substitutes depending on specific requirements.

Word count: 366 words

기술 솔루션에 XC6124F748MR-G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of XC6124F748MR-G in technical solutions:

  1. Question: What is XC6124F748MR-G?
    - Answer: XC6124F748MR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used for monitoring the voltage level in electronic circuits.

  2. Question: What is the operating voltage range of XC6124F748MR-G?
    - Answer: The operating voltage range of XC6124F748MR-G is typically between 0.8V and 6.0V.

  3. Question: What is the purpose of using XC6124F748MR-G in technical solutions?
    - Answer: XC6124F748MR-G is commonly used as a voltage monitoring and detection component in various electronic devices and systems. It helps ensure stable operation by providing alerts or triggering actions when the voltage exceeds or falls below a certain threshold.

  4. Question: Can XC6124F748MR-G be used in battery-powered applications?
    - Answer: Yes, XC6124F748MR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low power itself.

  5. Question: How does XC6124F748MR-G detect voltage levels?
    - Answer: XC6124F748MR-G uses an internal voltage reference and a comparator to monitor the input voltage. When the voltage crosses a predefined threshold, it triggers an output signal.

  6. Question: What is the output format of XC6124F748MR-G?
    - Answer: XC6124F748MR-G provides an open-drain output, which means it can be connected to other components or microcontrollers for further processing.

  7. Question: Is XC6124F748MR-G suitable for automotive applications?
    - Answer: Yes, XC6124F748MR-G is suitable for automotive applications as it can withstand a wide temperature range and has built-in protection features against voltage spikes and transients.

  8. Question: Can XC6124F748MR-G be used in industrial control systems?
    - Answer: Absolutely! XC6124F748MR-G is commonly used in industrial control systems to monitor power supply voltages and ensure the stability and safety of the overall system.

  9. Question: Does XC6124F748MR-G require any external components for operation?
    - Answer: XC6124F748MR-G requires minimal external components, such as capacitors for stability and noise filtering. The datasheet provides detailed information on the recommended circuit configuration.

  10. Question: Where can I find more information about XC6124F748MR-G?
    - Answer: You can find more information about XC6124F748MR-G, including its datasheet, application notes, and technical specifications, on the official website of Torex Semiconductor or by contacting their customer support.