NTCLE213E3303JHT1
Product Overview
Category
NTCLE213E3303JHT1 belongs to the category of thermistors.
Use
It is commonly used for temperature sensing and control applications.
Characteristics
- High sensitivity to temperature changes
- Wide operating temperature range
- Small size for easy integration into electronic circuits
Package
The NTCLE213E3303JHT1 is typically available in a small surface-mount package, making it suitable for compact designs.
Essence
The essence of NTCLE213E3303JHT1 lies in its ability to provide accurate temperature measurements in various electronic systems.
Packaging/Quantity
It is usually supplied in reels or trays, with quantities varying based on manufacturer specifications.
Specifications
- Resistance at 25°C: 33 kΩ
- Tolerance: ±5%
- Operating Temperature Range: -40°C to 125°C
- Maximum Power Rating: 150 mW
Detailed Pin Configuration
The NTCLE213E3303JHT1 typically has two pins, with the specific pinout configuration depending on the manufacturer's datasheet.
Functional Features
- Temperature-dependent resistance for precise temperature measurement
- Fast response time to changes in temperature
- Reliable performance across a wide temperature range
Advantages and Disadvantages
Advantages
- High sensitivity to temperature changes
- Compact size for easy integration
- Wide operating temperature range
Disadvantages
- Tolerance of ±5% may require additional calibration in some applications
- Limited power handling capacity compared to other temperature sensors
Working Principles
NTCLE213E3303JHT1 operates based on the principle of negative temperature coefficient (NTC), where its resistance decreases as the temperature increases. This characteristic allows it to accurately sense and measure temperature variations in electronic systems.
Detailed Application Field Plans
NTCLE213E3303JHT1 finds application in various fields, including: - HVAC systems - Automotive electronics - Consumer electronics - Industrial automation
Detailed and Complete Alternative Models
Some alternative models to NTCLE213E3303JHT1 include: - NTCLE100E3103JB0 - NTCLE100E3473JB0 - NTCLE100E3103JB0G
Note: The alternative models listed above are indicative and may vary based on specific requirements and availability from different manufacturers.
This comprehensive entry provides an in-depth understanding of NTCLE213E3303JHT1, covering its basic information, specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.
기술 솔루션에 NTCLE213E3303JHT1 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
What is the NTCLE213E3303JHT1?
- The NTCLE213E3303JHT1 is a thermistor, specifically an NTC (Negative Temperature Coefficient) thermistor, with a resistance of 33 kΩ at 25°C.
How is the NTCLE213E3303JHT1 used in temperature sensing applications?
- The NTCLE213E3303JHT1 can be used as a temperature sensor in various technical solutions due to its characteristic of changing resistance with temperature.
What are the typical applications of the NTCLE213E3303JHT1?
- Common applications include temperature measurement and compensation in consumer electronics, automotive systems, industrial equipment, and HVAC systems.
What is the temperature range for which the NTCLE213E3303JHT1 is suitable?
- The NTCLE213E3303JHT1 is suitable for a wide temperature range, typically from -40°C to 125°C.
How does the NTCLE213E3303JHT1 affect circuit performance in technical solutions?
- It can be used to provide temperature-dependent feedback or control signals, enabling precise temperature regulation in various systems.
What are the key electrical characteristics of the NTCLE213E3303JHT1?
- The key characteristics include its resistance at 25°C, its B-value, thermal time constant, and maximum power rating.
How can the NTCLE213E3303JHT1 be integrated into a circuit?
- It can be connected in series or parallel with other components to form a temperature sensing or compensation network within a circuit.
What are the considerations for PCB layout and component placement when using the NTCLE213E3303JHT1?
- Proper thermal isolation and accurate placement to ensure reliable temperature sensing and response.
Are there any calibration or compensation techniques required when using the NTCLE213E3303JHT1?
- Depending on the application, calibration and compensation may be necessary to achieve accurate temperature measurements.
Where can I find detailed technical specifications and application notes for the NTCLE213E3303JHT1?
- Detailed information can be found in the datasheet provided by the manufacturer, along with application notes and guidelines for optimal usage.