2KBP10M-E4/51
Product Overview
Category
The 2KBP10M-E4/51 belongs to the category of bridge rectifiers.
Use
It is commonly used in power supply applications for converting alternating current (AC) to direct current (DC).
Characteristics
- High voltage and high current capability
- Compact size
- Efficient heat dissipation
- Low forward voltage drop
Package
The 2KBP10M-E4/51 is typically available in a compact, heat-dissipating package suitable for various mounting options.
Essence
This bridge rectifier is essential for converting AC power to DC power in a wide range of electronic devices and equipment.
Packaging/Quantity
The 2KBP10M-E4/51 is usually packaged individually and is available in varying quantities based on customer requirements.
Specifications
- Maximum Average Forward Current: 20A
- Peak Repetitive Reverse Voltage: 1000V
- Maximum RMS Voltage: 700V
- Forward Voltage Drop: 1.1V at 10A
- Operating Temperature Range: -55°C to +150°C
Detailed Pin Configuration
The 2KBP10M-E4/51 typically has four pins, with two input pins for the AC supply and two output pins for the DC output.
Functional Features
- Full-wave rectification of AC input
- High current and voltage handling capabilities
- Low forward voltage drop for efficient power conversion
Advantages
- Compact size for space-constrained applications
- Efficient heat dissipation for improved reliability
- High current and voltage ratings for versatile use
Disadvantages
- Higher forward voltage drop compared to some alternative models
- May require additional heat sinking in high-power applications
Working Principles
The 2KBP10M-E4/51 operates on the principle of full-wave bridge rectification, where it converts the entire cycle of the input AC waveform into a pulsating DC output.
Detailed Application Field Plans
The 2KBP10M-E4/51 is widely used in: - Power supplies for industrial equipment - Battery chargers - Motor drives - Welding equipment - Uninterruptible power supplies (UPS)
Detailed and Complete Alternative Models
Some alternative models to the 2KBP10M-E4/51 include: - GBU10M-E4/51 - KBU10M-E4/51 - DBU10M-E4/51
In conclusion, the 2KBP10M-E4/51 bridge rectifier offers high current and voltage capabilities in a compact package, making it suitable for a wide range of power supply applications. Its efficient full-wave rectification and versatile use make it a valuable component in various electronic systems.
Word Count: 387
기술 솔루션에 2KBP10M-E4/51 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure, here are 10 common questions and answers related to the application of 2KBP10M-E4/51 in technical solutions:
What is the maximum repetitive peak reverse voltage of 2KBP10M-E4/51?
- The maximum repetitive peak reverse voltage is 1000 volts.
What is the average forward current rating of 2KBP10M-E4/51?
- The average forward current rating is 2 amps.
Can 2KBP10M-E4/51 be used in rectifier applications?
- Yes, it is commonly used as a rectifier in power supply circuits.
What is the typical forward voltage drop of 2KBP10M-E4/51 at its rated current?
- The typical forward voltage drop is around 1.1 volts at the rated current.
Is 2KBP10M-E4/51 suitable for high-frequency applications?
- It is not recommended for high-frequency applications due to its recovery time.
What is the maximum junction temperature of 2KBP10M-E4/51?
- The maximum junction temperature is 150°C.
Can 2KBP10M-E4/51 be used in bridge rectifier configurations?
- Yes, it is commonly used in bridge rectifier circuits.
What is the typical reverse recovery time of 2KBP10M-E4/51?
- The typical reverse recovery time is 5 microseconds.
Does 2KBP10M-E4/51 require a heatsink for certain applications?
- Yes, for high current or high-duty cycle applications, a heatsink may be necessary.
What are some common applications for 2KBP10M-E4/51?
- Common applications include AC-DC power supplies, motor drives, welding equipment, and battery chargers.
These questions and answers should provide a good overview of the application of 2KBP10M-E4/51 in technical solutions. If you have any more specific questions, feel free to ask!