Vishay Semiconductor Diodes Division
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
BZW03C9V1-TAP
자세히보기 데이터시트

BZW03C9V1-TAP

Introduction

The BZW03C9V1-TAP is a transient voltage suppressor (TVS) diode belonging to the category of electronic components used for protecting sensitive electronics from voltage spikes and transients. This entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the BZW03C9V1-TAP.

Basic Information Overview

  • Category: Electronic Components
  • Use: Protection against voltage spikes and transients
  • Characteristics: Fast response time, low clamping voltage, high surge current capability
  • Package: DO-15
  • Essence: TVS diode for transient voltage protection
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies by manufacturer

Specifications

  • Voltage - Reverse Standoff (Typ): 7.58V
  • Voltage - Breakdown (Min): 8.4V
  • Voltage - Clamping (Max) @ Ipp: 14.5V
  • Current - Peak Pulse (10/1000µs): 40A
  • Power - Peak Pulse: 600W
  • Type: Zener
  • Unidirectional Channels: 1
  • Polarity: Unidirectional

Detailed Pin Configuration

The BZW03C9V1-TAP TVS diode has a standard DO-15 package with two leads. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Fast response time
  • Low clamping voltage
  • High surge current capability
  • ESD protection

Advantages and Disadvantages

Advantages

  • Effective protection against voltage spikes and transients
  • Fast response time ensures minimal damage to sensitive electronics
  • High surge current capability for robust protection

Disadvantages

  • May require additional circuitry for comprehensive overvoltage protection
  • Unidirectional protection only

Working Principles

The BZW03C9V1-TAP operates based on the principle of avalanche breakdown. When a voltage spike or transient occurs, the TVS diode rapidly conducts, diverting excess current away from the protected circuit. This action clamps the voltage to a safe level, safeguarding the connected electronics.

Detailed Application Field Plans

The BZW03C9V1-TAP is widely used in various applications requiring transient voltage protection, including: - Power supply units - Communication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the BZW03C9V1-TAP include: - P6KE6.8CA - 1.5KE6.8A - SMAJ7.5A

In conclusion, the BZW03C9V1-TAP is a crucial component for protecting sensitive electronics from voltage spikes and transients. Its fast response time, low clamping voltage, and high surge current capability make it an essential part of many electronic systems.

(Word count: 411)

기술 솔루션에 BZW03C9V1-TAP 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the maximum voltage rating of BZW03C9V1-TAP?

    • The maximum voltage rating of BZW03C9V1-TAP is 9.1V.

  2. What is the peak pulse power dissipation of BZW03C9V1-TAP?

    • The peak pulse power dissipation of BZW03C9V1-TAP is 3000W.

  3. What is the breakdown voltage of BZW03C9V1-TAP?

    • The breakdown voltage of BZW03C9V1-TAP is 10.5V.

  4. What is the typical clamping voltage of BZW03C9V1-TAP?

    • The typical clamping voltage of BZW03C9V1-TAP is 15.6V at 10A.

  5. What is the package type of BZW03C9V1-TAP?

    • BZW03C9V1-TAP comes in a DO-15 package.

  6. What are the applications of BZW03C9V1-TAP?

    • BZW03C9V1-TAP is commonly used for transient voltage suppression in various electronic circuits, such as power supplies, automotive electronics, and industrial equipment.

  7. What is the operating temperature range of BZW03C9V1-TAP?

    • The operating temperature range of BZW03C9V1-TAP is -55°C to 175°C.

  8. Does BZW03C9V1-TAP require a heat sink for operation?

    • In most cases, BZW03C9V1-TAP does not require a heat sink due to its high power dissipation capability.

  9. Is BZW03C9V1-TAP RoHS compliant?

    • Yes, BZW03C9V1-TAP is RoHS compliant, making it suitable for use in environmentally conscious designs.

  10. Can BZW03C9V1-TAP be used for surge protection in telecommunications equipment?

    • Yes, BZW03C9V1-TAP is suitable for surge protection in telecommunications equipment due to its high power dissipation and clamping capabilities.