Vishay Semiconductor Diodes Division
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
BZW03D8V2-TAP
자세히보기 데이터시트

BZW03D8V2-TAP

Introduction

The BZW03D8V2-TAP is a transient voltage suppressor (TVS) diode belonging to the category of electronic components used for protecting sensitive electronics from voltage spikes and transients. This entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the BZW03D8V2-TAP.

Basic Information Overview

  • Category: Electronic Components
  • Use: Protection against voltage spikes and transients
  • Characteristics: High surge capability, low clamping voltage, fast response time
  • Package: DO-15
  • Essence: TVS diode for transient voltage suppression
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies by manufacturer

Specifications

  • Voltage - Reverse Standoff (Typ): 6.4V
  • Voltage - Breakdown (Min): 7.13V
  • Voltage - Clamping (Max) @ Ipp: 11V
  • Current - Peak Pulse (10/1000µs): 40A
  • Power - Peak Pulse: 600W
  • Type: Zener
  • Unidirectional Channels: 1
  • Polarization: Unidirectional

Detailed Pin Configuration

The BZW03D8V2-TAP typically has two pins, with the cathode connected to the ground and the anode connected to the protected circuit.

Functional Features

  • Provides protection against voltage transients
  • Fast response time
  • Low clamping voltage
  • High surge capability

Advantages and Disadvantages

Advantages

  • Effective protection against voltage spikes
  • Fast response time ensures minimal damage to protected circuits
  • High surge capability for robust performance

Disadvantages

  • Clamping voltage may be higher than some alternative models
  • Limited to unidirectional protection

Working Principles

When a voltage transient occurs, the BZW03D8V2-TAP conducts current to divert the transient energy away from the protected circuit, thereby limiting the voltage across it.

Detailed Application Field Plans

The BZW03D8V2-TAP is commonly used in various electronic devices and systems, including: - Power supply units - Communication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the BZW03D8V2-TAP include: - P6KE6.8CA - 1.5KE6.8A - SMAJ6.8A - SMCJ6.8A

In summary, the BZW03D8V2-TAP is a TVS diode designed to protect sensitive electronics from voltage transients. Its high surge capability, low clamping voltage, and fast response time make it suitable for a wide range of applications in various industries.

Word count: 398

기술 솔루션에 BZW03D8V2-TAP 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure, here are 10 common questions and answers related to the application of BZW03D8V2-TAP in technical solutions:

  1. What is the maximum reverse standoff voltage of BZW03D8V2-TAP?

    • The maximum reverse standoff voltage of BZW03D8V2-TAP is 8.2V.

  2. What is the peak pulse power dissipation of BZW03D8V2-TAP?

    • The peak pulse power dissipation of BZW03D8V2-TAP is 3000W.

  3. What is the typical clamping voltage of BZW03D8V2-TAP?

    • The typical clamping voltage of BZW03D8V2-TAP is 13.4V at 100A.

  4. What are the typical applications of BZW03D8V2-TAP?

    • BZW03D8V2-TAP is commonly used in surge protection for sensitive electronics, such as telecommunications equipment, industrial control systems, and automotive electronics.

  5. What is the operating temperature range of BZW03D8V2-TAP?

    • The operating temperature range of BZW03D8V2-TAP is -55°C to +175°C.

  6. Does BZW03D8V2-TAP meet industry standards for surge protection?

    • Yes, BZW03D8V2-TAP complies with industry standards such as IEC 61000-4-5 for surge immunity.

  7. Can BZW03D8V2-TAP be used in high-speed data lines?

    • Yes, BZW03D8V2-TAP is suitable for protecting high-speed data lines, including Ethernet and USB interfaces.

  8. What package type does BZW03D8V2-TAP come in?

    • BZW03D8V2-TAP is available in a DO-15 package.

  9. Is BZW03D8V2-TAP RoHS compliant?

    • Yes, BZW03D8V2-TAP is RoHS compliant, making it suitable for use in environmentally conscious designs.

  10. Are there any recommended layout considerations when using BZW03D8V2-TAP in a circuit?

    • It is recommended to minimize the length and impedance of the connections to BZW03D8V2-TAP and to ensure proper grounding for optimal performance.

I hope these questions and answers are helpful for your technical solutions involving BZW03D8V2-TAP! If you have any more specific questions, feel free to ask.