Vishay Semiconductor Diodes Division
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
SMPC75AN-M3/H
자세히보기 데이터시트

SMPC75AN-M3/H

Introduction

The SMPC75AN-M3/H is a semiconductor product belonging to the category of power diodes. This entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the SMPC75AN-M3/H.

Basic Information Overview

  • Category: Power Diode
  • Use: Rectification in power supply circuits
  • Characteristics: High current capability, low forward voltage drop
  • Package: SMA (DO-214AC)
  • Essence: Efficient rectification of high-power circuits
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Voltage Rating: 75V
  • Forward Current: 7.5A
  • Reverse Recovery Time: 35ns
  • Operating Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The SMPC75AN-M3/H follows the standard pin configuration for SMA (DO-214AC) package: 1. Anode 2. Cathode

Functional Features

  • High current capability for power applications
  • Low forward voltage drop for efficient energy conversion
  • Fast reverse recovery time for reduced switching losses

Advantages and Disadvantages

Advantages

  • High current rating allows for use in high-power applications
  • Low forward voltage drop minimizes power dissipation
  • Fast reverse recovery time enhances efficiency

Disadvantages

  • Limited voltage rating compared to some other power diodes
  • Sensitive to temperature variations due to wide operating temperature range

Working Principles

The SMPC75AN-M3/H operates based on the principle of unidirectional conduction, allowing current flow in one direction while blocking it in the reverse direction. When forward-biased, it conducts current with minimal voltage drop, making it suitable for power supply rectification.

Detailed Application Field Plans

The SMPC75AN-M3/H is commonly used in the following applications: - Switch-mode power supplies - DC-DC converters - Motor drives - Solar inverters

Detailed and Complete Alternative Models

Some alternative models to the SMPC75AN-M3/H include: - MBRB1545CTG - STPS20H100CT - PDS545-13

In conclusion, the SMPC75AN-M3/H power diode offers high current capability, low forward voltage drop, and fast reverse recovery time, making it suitable for various power supply and conversion applications.

[Word Count: 366]

기술 솔루션에 SMPC75AN-M3/H 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the maximum power dissipation of SMPC75AN-M3/H?

    • The maximum power dissipation of SMPC75AN-M3/H is 75 watts.

  2. What is the maximum junction temperature for SMPC75AN-M3/H?

    • The maximum junction temperature for SMPC75AN-M3/H is 175°C.

  3. What is the typical forward voltage drop of SMPC75AN-M3/H at a certain current?

    • The typical forward voltage drop of SMPC75AN-M3/H varies with current and can be found in the datasheet.

  4. What are the recommended mounting instructions for SMPC75AN-M3/H?

    • It is recommended to refer to the datasheet for specific mounting instructions, including recommended torque values for the mounting hardware.

  5. Does SMPC75AN-M3/H have overcurrent protection?

    • SMPC75AN-M3/H does not have built-in overcurrent protection and should be used with an appropriate external protection circuit.

  6. What is the reverse recovery time of SMPC75AN-M3/H?

    • The reverse recovery time of SMPC75AN-M3/H can be found in the datasheet and varies with operating conditions.

  7. Can SMPC75AN-M3/H be used in parallel to increase current handling capability?

    • Yes, SMPC75AN-M3/H can be used in parallel to increase current handling capability, but proper thermal management and current sharing must be considered.

  8. What are the typical applications for SMPC75AN-M3/H?

    • Typical applications for SMPC75AN-M3/H include power supplies, motor drives, and inverters.

  9. What is the maximum allowable junction-to-case thermal resistance for SMPC75AN-M3/H?

    • The maximum allowable junction-to-case thermal resistance for SMPC75AN-M3/H can be found in the datasheet and is important for thermal design considerations.

  10. Is SMPC75AN-M3/H RoHS compliant?

    • Yes, SMPC75AN-M3/H is RoHS compliant, meaning it meets the Restriction of Hazardous Substances directive for environmental safety.