SS16-004HE3_A/I
Product Overview
Category: Diode
Use: Rectification and voltage regulation
Characteristics: High efficiency, low forward voltage drop
Package: SOD-123
Essence: Schottky diode
Packaging/Quantity: Tape & Reel, 3000 units per reel
Specifications
- Forward Voltage: 0.35V
- Reverse Voltage: 40V
- Forward Current: 1A
- Reverse Leakage Current: 5µA
Detailed Pin Configuration
The SS16-004HE3_A/I has two pins, the anode and the cathode. The anode is connected to the positive terminal of the circuit, while the cathode is connected to the negative terminal.
Functional Features
- Low forward voltage drop ensures minimal power loss
- Fast switching speed for high-frequency applications
- High temperature operation up to 125°C
Advantages and Disadvantages
Advantages: - High efficiency - Fast response time - Small form factor
Disadvantages: - Limited reverse voltage tolerance - Higher cost compared to standard diodes
Working Principles
The SS16-004HE3_A/I operates based on the Schottky barrier principle, where a metal-semiconductor junction is formed, resulting in low forward voltage drop and fast switching characteristics.
Detailed Application Field Plans
This diode is suitable for various applications including: - Switching power supplies - Voltage clamping - Reverse polarity protection - DC-DC converters
Detailed and Complete Alternative Models
- 1N5819: Similar specifications and package
- BAT54S: Dual diode with similar characteristics
- SB140: Higher current rating alternative
Note: The above information is for reference purposes only. Always refer to the manufacturer's datasheet for accurate details.
Word count: 294
기술 솔루션에 SS16-004HE3_A/I 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
What is SS16-004HE3_A/I?
- SS16-004HE3_A/I is a Schottky diode, commonly used in electronic circuits for its low forward voltage drop and fast switching capabilities.
What are the typical applications of SS16-004HE3_A/I?
- It is commonly used in power supply circuits, voltage clamping, reverse polarity protection, and signal demodulation.
What is the maximum forward voltage of SS16-004HE3_A/I?
- The maximum forward voltage of SS16-004HE3_A/I is typically around 0.5V at a forward current of 1A.
What is the reverse leakage current of SS16-004HE3_A/I?
- The reverse leakage current is typically very low, around a few microamps at the rated voltage.
Can SS16-004HE3_A/I handle high-frequency signals?
- Yes, SS16-004HE3_A/I is suitable for high-frequency applications due to its fast switching characteristics.
What is the maximum operating temperature of SS16-004HE3_A/I?
- The maximum operating temperature is typically around 125°C, making it suitable for a wide range of environments.
Is SS16-004HE3_A/I suitable for automotive applications?
- Yes, SS16-004HE3_A/I is often used in automotive electronics due to its reliability and performance under harsh conditions.
Does SS16-004HE3_A/I require a heat sink for high-power applications?
- For high-power applications, a heat sink may be necessary to dissipate heat effectively and ensure optimal performance.
What are the key advantages of using SS16-004HE3_A/I in technical solutions?
- Some key advantages include low forward voltage drop, fast switching speed, low reverse leakage current, and suitability for high-frequency applications.
Are there any common failure modes or issues associated with SS16-004HE3_A/I?
- Common issues may include thermal runaway at high temperatures or excessive reverse voltage leading to breakdown, so proper design considerations are important to prevent these issues.