Vishay Semiconductor Diodes Division
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
VLZ6V8A-GS18
자세히보기 데이터시트

VLZ6V8A-GS18 Product Overview

Introduction

The VLZ6V8A-GS18 is a semiconductor product belonging to the category of voltage regulators. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: Regulating voltage in electronic circuits
  • Characteristics: High precision, low dropout voltage, low quiescent current
  • Package: SOT-223
  • Essence: Semiconductor device for maintaining a stable output voltage
  • Packaging/Quantity: Typically available in reels of 3000 units

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage: 1.2V to 5.5V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV at 100mA
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The VLZ6V8A-GS18 typically has three pins: 1. Input (VIN): Connects to the input voltage source 2. Ground (GND): Connected to the ground reference 3. Output (VOUT): Provides the regulated output voltage

Functional Features

  • Low Dropout: Enables operation with small voltage differentials between input and output
  • Short Circuit Protection: Safeguards the regulator and connected circuitry from damage
  • Thermal Shutdown: Prevents overheating under excessive load conditions

Advantages and Disadvantages

Advantages

  • High precision regulation
  • Low dropout voltage
  • Small package size
  • Wide operating temperature range

Disadvantages

  • Limited maximum output current
  • Higher quiescent current compared to some alternatives

Working Principles

The VLZ6V8A-GS18 operates by comparing the output voltage to a reference and adjusting the pass element to maintain a constant output voltage despite variations in input voltage and load.

Detailed Application Field Plans

The VLZ6V8A-GS18 is suitable for various applications including: - Battery-powered devices - Portable electronics - IoT devices - Sensor modules - Wearable technology

Detailed and Complete Alternative Models

Some alternative models to the VLZ6V8A-GS18 include: - LM1117 - MCP1700 - XC6206

In conclusion, the VLZ6V8A-GS18 is a versatile voltage regulator with precise regulation and compact design, making it suitable for a wide range of electronic applications.

[Word Count: 411]

기술 솔루션에 VLZ6V8A-GS18 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the VLZ6V8A-GS18?

    • The VLZ6V8A-GS18 is a voltage level shifter and translator designed to convert signals between different voltage levels in technical solutions.

  2. What voltage levels can the VLZ6V8A-GS18 handle?

    • The VLZ6V8A-GS18 can handle voltage levels ranging from 1.2V to 3.6V on the low side and 1.65V to 5.5V on the high side.

  3. What are the typical applications of the VLZ6V8A-GS18?

    • The VLZ6V8A-GS18 is commonly used in applications such as data communication, industrial automation, consumer electronics, and automotive systems.

  4. How does the VLZ6V8A-GS18 ensure signal integrity during voltage translation?

    • The VLZ6V8A-GS18 incorporates features such as overvoltage protection, undervoltage lockout, and ESD protection to maintain signal integrity during voltage translation.

  5. Can the VLZ6V8A-GS18 handle bidirectional voltage translation?

    • Yes, the VLZ6V8A-GS18 supports bidirectional voltage translation, making it suitable for applications requiring both level shifting and level translation.

  6. What is the maximum data rate supported by the VLZ6V8A-GS18?

    • The VLZ6V8A-GS18 can support data rates up to 100 Mbps, making it suitable for high-speed communication interfaces.

  7. Does the VLZ6V8A-GS18 require external components for operation?

    • The VLZ6V8A-GS18 requires minimal external components, typically only requiring decoupling capacitors for proper operation.

  8. Is the VLZ6V8A-GS18 compatible with different logic families such as CMOS, TTL, and LVCMOS?

    • Yes, the VLZ6V8A-GS18 is compatible with various logic families, providing flexibility in interfacing with different types of devices.

  9. What is the power consumption of the VLZ6V8A-GS18?

    • The VLZ6V8A-GS18 has low power consumption, making it suitable for battery-powered and energy-efficient applications.

  10. Are there any specific layout considerations when using the VLZ6V8A-GS18 in a design?

    • Proper PCB layout practices, including minimizing trace lengths and ensuring good ground connections, are recommended for optimal performance when using the VLZ6V8A-GS18 in a design.