Vishay Semiconductor Opto Division
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
TSOP36333TR
자세히보기 데이터시트

TSOP36333TR

Product Overview

Category

The TSOP36333TR belongs to the category of infrared receivers.

Use

It is used for receiving and decoding infrared signals from remote controls.

Characteristics

  • High sensitivity
  • Wide operating voltage range
  • Low power consumption
  • Suitable for all common IR carrier frequencies

Package

The TSOP36333TR comes in a small, surface-mount package.

Essence

This product is essential for applications requiring remote control functionality using infrared signals.

Packaging/Quantity

The TSOP36333TR is typically available in reels with a quantity of 2500 units per reel.

Specifications

  • Supply Voltage: 2.5V to 5.5V
  • Carrier Frequency: 33kHz
  • Supply Current: 350µA
  • Operating Temperature Range: -25°C to 85°C
  • Output Voltage: 0.4V (min) / VS (max)

Detailed Pin Configuration

The TSOP36333TR has three pins: 1. OUT (Output) 2. GND (Ground) 3. VS (Supply Voltage)

Functional Features

  • Photodetector and preamplifier in one package
  • Internal filter for PCM frequency
  • Shielding against electrical field disturbance
  • TTL and CMOS compatibility

Advantages

  • High immunity against ambient light
  • Improved shielding against electrical field disturbances
  • Compatible with various microcontrollers and logic devices

Disadvantages

  • Limited to specific carrier frequencies
  • Requires line of sight for effective operation

Working Principles

The TSOP36333TR operates by receiving modulated infrared signals from a remote control. It then demodulates and amplifies the signal to provide a clean output for further processing.

Detailed Application Field Plans

The TSOP36333TR is widely used in consumer electronics such as TVs, air conditioners, and audio systems. It is also utilized in industrial automation for remote control applications.

Detailed and Complete Alternative Models

  • TSOP38233TR: Similar specifications with a different carrier frequency
  • TSOP48333TR: Higher sensitivity variant for longer-range applications
  • TSOP22333TR: Lower power consumption variant for battery-operated devices

In conclusion, the TSOP36333TR is a versatile infrared receiver suitable for a wide range of remote control applications. Its high sensitivity, low power consumption, and compatibility with various devices make it an ideal choice for consumer electronics and industrial automation.

(Word count: 366)

기술 솔루션에 TSOP36333TR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is TSOP36333TR?

    • TSOP36333TR is a miniaturized IR receiver module for infrared remote control systems.

  2. What is the operating voltage of TSOP36333TR?

    • The operating voltage of TSOP36333TR is typically 2.5V to 5.5V.

  3. What is the typical reception range of TSOP36333TR?

    • The typical reception range of TSOP36333TR is 45 meters.

  4. What is the carrier frequency of TSOP36333TR?

    • The carrier frequency of TSOP36333TR is 33kHz.

  5. What is the output signal of TSOP36333TR?

    • TSOP36333TR provides a demodulated output signal.

  6. What is the typical supply current of TSOP36333TR?

    • The typical supply current of TSOP36333TR is 350µA.

  7. What is the pinout configuration of TSOP36333TR?

    • TSOP36333TR has a standard pinout configuration with VCC, GND, and OUT pins.

  8. Is TSOP36333TR compatible with common microcontrollers?

    • Yes, TSOP36333TR is compatible with most common microcontrollers.

  9. Does TSOP36333TR have any special power-saving features?

    • Yes, TSOP36333TR has a low-power mode for power-saving applications.

  10. Can TSOP36333TR be used in automotive applications?

    • Yes, TSOP36333TR can be used in automotive applications due to its robust design and performance.

Please let me know if you need further assistance!