이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
IRFP150PBF

IRFP150PBF

Product Overview

Category: Power MOSFET
Use: Switching applications in power supplies, converters, and motor control
Characteristics: High voltage, high speed, low on-resistance
Package: TO-247AC
Essence: Power MOSFET for high-power switching applications
Packaging/Quantity: Tube/50 units

Specifications

  • Voltage - Drain-Source Breakdown (Max): 100V
  • Current - Continuous Drain (Id) @ 25°C: 42A
  • Rds On (Max) @ Id, Vgs: 0.117 Ohm @ 21A, 10V
  • Vgs(th) (Max) @ Id: 4V @ 250µA
  • Gate Charge (Qg) @ Vgs: 60nC @ 10V
  • Input Capacitance (Ciss) @ Vds: 3100pF @ 25V
  • Power Dissipation (Max): 190W

Detailed Pin Configuration

  1. Gate (G)
  2. Drain (D)
  3. Source (S)

Functional Features

  • Fast switching speed
  • Low gate drive power loss
  • High input impedance
  • Low output capacitance

Advantages

  • High voltage capability
  • Low on-resistance
  • Suitable for high-frequency applications
  • Good thermal performance

Disadvantages

  • Higher cost compared to lower voltage MOSFETs
  • Requires careful handling due to sensitivity to static electricity

Working Principles

The IRFP150PBF operates based on the principles of field-effect transistors, utilizing a voltage-controlled input to regulate the flow of current between the drain and source terminals.

Detailed Application Field Plans

  1. Power Supplies: Used in high-power switch-mode power supplies for efficient voltage regulation.
  2. Converters: Employed in DC-DC converters for stepping up or down voltages with minimal power loss.
  3. Motor Control: Utilized in motor drive circuits to regulate the speed and direction of motors.

Detailed and Complete Alternative Models

  1. IRFP250PBF: Higher voltage rating (200V) for more demanding applications.
  2. IRFP450PBF: Lower voltage rating (50V) suitable for less demanding applications.
  3. IRFP350PBF: Intermediate voltage rating (150V) offering a balance between the IRFP250PBF and IRFP450PBF.

Note: The alternative models listed above are from the same manufacturer and share similar characteristics.

This comprehensive entry provides an in-depth understanding of the IRFP150PBF, covering its specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

기술 솔루션에 IRFP150PBF 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the maximum drain-source voltage of IRFP150PBF?

    • The maximum drain-source voltage of IRFP150PBF is 100V.
  2. What is the continuous drain current rating of IRFP150PBF?

    • The continuous drain current rating of IRFP150PBF is 42A.
  3. What is the on-state resistance (RDS(on)) of IRFP150PBF?

    • The on-state resistance (RDS(on)) of IRFP150PBF is typically 0.09 ohms.
  4. Can IRFP150PBF be used in high-frequency switching applications?

    • Yes, IRFP150PBF can be used in high-frequency switching applications due to its fast switching characteristics.
  5. What is the maximum junction temperature of IRFP150PBF?

    • The maximum junction temperature of IRFP150PBF is 175°C.
  6. Is IRFP150PBF suitable for use in power supply designs?

    • Yes, IRFP150PBF is suitable for use in power supply designs due to its high current and voltage ratings.
  7. Does IRFP150PBF require a heat sink for certain applications?

    • Yes, IRFP150PBF may require a heat sink for high-power applications to dissipate heat effectively.
  8. What are the typical gate charge and input capacitance values for IRFP150PBF?

    • The typical gate charge is 60nC and the input capacitance is 3600pF for IRFP150PBF.
  9. Can IRFP150PBF be used in automotive electronic systems?

    • Yes, IRFP150PBF can be used in automotive electronic systems where high power handling is required.
  10. Are there any recommended driver ICs for controlling IRFP150PBF in motor drive applications?

    • Yes, driver ICs such as IR2104 or IR21844 are commonly used with IRFP150PBF in motor drive applications.