Zilog
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
Z84C9008ASC
자세히보기 데이터시트

Z84C9008ASC

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Microcontroller
  • Characteristics: High-performance, low-power consumption
  • Package: 44-pin Plastic Dual In-Line Package (PDIP)
  • Essence: The Z84C9008ASC is a microcontroller designed for various applications that require high performance and low power consumption.
  • Packaging/Quantity: Available in tubes or reels, quantity depends on the supplier.

Specifications

  • Architecture: 8-bit
  • Clock Frequency: Up to 20 MHz
  • Program Memory: 8 KB ROM
  • Data Memory: 256 bytes RAM
  • I/O Pins: 32
  • Timers/Counters: 2 x 16-bit
  • Serial Communication: UART, SPI, I2C
  • Operating Voltage: 2.7V to 5.5V
  • Operating Temperature: -40°C to +85°C

Pin Configuration

The Z84C9008ASC has a total of 44 pins. Here is a detailed pin configuration:

  1. VCC
  2. P0.0 / AD0
  3. P0.1 / AD1
  4. P0.2 / AD2
  5. P0.3 / AD3
  6. P0.4 / AD4
  7. P0.5 / AD5
  8. P0.6 / AD6
  9. P0.7 / AD7
  10. P1.0 / ALE
  11. P1.1 / RD
  12. P1.2 / WR
  13. P1.3 / T0
  14. P1.4 / T1
  15. P1.5 / INT0
  16. P1.6 / INT1
  17. P1.7 / INT2
  18. XTAL1
  19. XTAL2
  20. GND
  21. P2.0 / A8
  22. P2.1 / A9
  23. P2.2 / A10
  24. P2.3 / A11
  25. P2.4 / A12
  26. P2.5 / A13
  27. P2.6 / A14
  28. P2.7 / A15
  29. P3.0 / RXD
  30. P3.1 / TXD
  31. P3.2 / INT3
  32. P3.3 / INT4
  33. P3.4 / INT5
  34. P3.5 / INT6
  35. P3.6 / INT7
  36. P3.7 / INT8
  37. EA / VPP
  38. ALE
  39. PSEN
  40. RD
  41. WR
  42. XTAL1
  43. XTAL2
  44. RESET

Functional Features

  • High-performance 8-bit microcontroller with a clock frequency of up to 20 MHz.
  • Low power consumption, suitable for battery-powered applications.
  • 8 KB of program memory (ROM) for storing instructions.
  • 256 bytes of data memory (RAM) for temporary storage.
  • 32 I/O pins for interfacing with external devices.
  • Two 16-bit timers/counters for precise timing operations.
  • Serial communication interfaces including UART, SPI, and I2C.
  • Wide operating voltage range from 2.7V to 5.5V.
  • Extended temperature range from -40°C to +85°C.

Advantages and Disadvantages

Advantages: - High-performance capabilities for demanding applications. - Low power consumption extends battery life. - Sufficient program and data memory for most applications. - Versatile I/O pins for interfacing with various devices. - Multiple serial communication options for flexible connectivity.

Disadvantages: - Limited program memory compared to some other microcontrollers. - Relatively small data memory may restrict complex operations. - Availability and pricing may vary depending on the supplier.

Working Principles

The Z84C9008ASC operates based on an 8-bit architecture. It executes instructions stored in its internal ROM and performs calculations using the data stored in RAM. The microcontroller communicates with external devices through its I/O pins and supports various serial communication protocols. It can be programmed using a suitable development environment to perform specific tasks.

Application Field Plans

The Z84C9008ASC is widely used in various applications, including but not limited to: - Industrial automation systems - Consumer electronics - Medical devices - Automotive electronics - Home appliances

Its high performance, low power consumption, and versatile features make it suitable for a wide range of applications.

Alternative Models

If the Z84

기술 솔루션에 Z84C9008ASC 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of Z84C9008ASC in technical solutions:

  1. Q: What is Z84C9008ASC? A: Z84C9008ASC is a microcontroller chip manufactured by Zilog, which is commonly used in various technical solutions.

  2. Q: What are the key features of Z84C9008ASC? A: Some key features of Z84C9008ASC include an 8-bit CPU, on-chip RAM and ROM, multiple I/O ports, timers/counters, and serial communication interfaces.

  3. Q: What are the typical applications of Z84C9008ASC? A: Z84C9008ASC is often used in applications such as industrial control systems, embedded systems, home automation, robotics, and consumer electronics.

  4. Q: How much memory does Z84C9008ASC have? A: Z84C9008ASC has 8KB of on-chip ROM (Read-Only Memory) and 256 bytes of on-chip RAM (Random Access Memory).

  5. Q: Can I expand the memory of Z84C9008ASC? A: Yes, you can expand the memory of Z84C9008ASC by connecting external memory devices like EEPROM or RAM to its address and data bus.

  6. Q: What programming language is used to program Z84C9008ASC? A: Z84C9008ASC can be programmed using assembly language or high-level languages like C, depending on the development tools available.

  7. Q: What voltage does Z84C9008ASC operate at? A: Z84C9008ASC operates at a supply voltage range of 4.5V to 5.5V.

  8. Q: Can Z84C9008ASC communicate with other devices? A: Yes, Z84C9008ASC supports serial communication interfaces like UART (Universal Asynchronous Receiver-Transmitter) and SPI (Serial Peripheral Interface).

  9. Q: Is Z84C9008ASC suitable for battery-powered applications? A: Yes, Z84C9008ASC is designed to be power-efficient and can be used in battery-powered applications, provided the power requirements are met.

  10. Q: Are there any development tools available for Z84C9008ASC? A: Yes, Zilog provides development tools like assemblers, compilers, debuggers, and evaluation boards to aid in programming and testing Z84C9008ASC-based solutions.

Please note that these questions and answers are general and may vary depending on specific use cases and requirements.